This commit adds a new flag, j6_channel_block, and a new flags param to
the channel_receive syscall. When the block flag is specified, the
caller will block waiting for data on the channel if the channel is
empty.
Influenced by other libc implementations, I had tried to make memcpy
smarter for differently-sized ranges, but my benchmarks showed no real
change. So change memcpy back to the simple rep movsb implementation.
There was a specialization of util::hash() for uint64_t (which just
returns the integer value), but other integer sizes did not previously
have similar specializations.
Also, two minor semi-related changes to util::map - skip copying empty
nodes when growing the map, and assert that the hash is non-zero when
inserting a new node.
The constexpr_hash.h header has fallen out of use. As constexpr hashing
will be used for IDs with the service locator protocol, update these
hashes to be 32 and 64 bit FNV-1a, and replace the _h user-defined
literal with _id (a 64-bit hash), and _id8 (a 32-bit hash folded down to
8 bits). These are now in the util/hash.h header along with the runtime
hash functions.
Three issues that caused build breaks when regenerating the build
directory after the previous commits:
- system.def was including endpoint.def
- syscalls/vm_area.cpp was including j6/signals.h
- util/util.h was missing an include of stddef.h
The new mailbox kernel object API offers asynchronous message-based IPC
for sending data and handles between threads, as opposed to endpoint's
synchronous model.
In preparation for the new mailbox IPC model, blocking threads needed an
overhaul. The `wait_on_*` and `wake_on_*` methods are gone, and the
`block()` and `wake()` calls on threads now pass a value between the
waker and the blocked thread.
As part of this change, the concept of signals on the base kobject class
was removed, along with the queue of blocked threads waiting on any
given object. Signals are now exclusively the domain of the event object
type, and the new wait_queue utility class helps manage waiting threads
when an object does actually need this functionality. In some cases (eg,
logger) an event object is used instead of the lower-level wait_queue.
Since this change has a lot of ramifications, this large commit includes
the following additional changes:
- The j6_object_wait, j6_object_wait_many, and j6_thread_pause syscalls
have been removed.
- The j6_event_clear syscall has been removed - events are "cleared" by
reading them now. A new j6_event_wait syscall has been added to read
events.
- The generic close() method on kobject has been removed.
- The on_no_handles() method on kobject now deletes the object by
default, and needs to be overridden by classes that should not be.
- The j6_system_bind_irq syscall now takes an event handle, as well as a
signal that the IRQ should set on the event. IRQs will cause a waiting
thread to be woken with the appropriate bit set.
- Threads waking due to timeout is simplified to just having a
wake_timeout() accessor that returns a timestamp.
- The new wait_queue uses util::deque, which caused the disovery of two
bugs in the deque implementation: empty deques could still have a
single array allocated and thus return true for empty(), and new
arrays getting allocated were not being zeroed first.
- Exposed a new erase() method on util::map that takes a node pointer
instead of a key, skipping lookup.
The __init_libc function was already running the .init_array functions,
but was never running the .preinit_array functions. Now it runs them
both, in the correct order.
This commit joins the implementation of exit, _Exit, and abort into a
single translation unit, and also adds atexit, at_quick_exit, and
quick_exit. While this does go against the ideal of all libc functions
being in their own translation unit, their implementations are very
related, and so I think this makes sense.
The ctype functions are now both macros and functions (as allowed by the
spec). They're now implemented in the ctype_b style of glibc, as
libunwind wants __ctype_b_loc to work.
The new "noreturn" option tag on syscall methods causes those methods to
be generated with [[noreturn]] / _Noreturn to avoid clang complaining
that other functions marked noreturn, like exit(), because it can't tell
that the syscall never returns.
This new libc is mostly from scratch, with *printf() functions provided
by Marco Paland and Eyal Rozenberg's tiny printf library, and malloc and
friends provided by dlmalloc.
The great header shift: It didn't make sense to regenerate headers for
the same module for every target (boot/kernel/user) it appeared in. And
now that core headers are out of src/include, this was going to cause
problems for the new libc changes I've been working on. So I went back
to re-design how module headers work.
Pre-requisites:
- A module's public headers should all be available in one location, not
tied to target.
- No accidental includes. Another module should not be able to include
anything (creating an implicit dependency) from a module without
declaring an explicit dependency.
- Exception to the previous: libc's headers should be available to all,
at least for the freestanding headers.
New system:
- A new "public_headers" property of module declares all public headers
that should be available to dependant modules
- All public headers (after possible processing) are installed relative
to build/include/<module> with the same path as their source
- This also means no "include" dir in modules is necessary. If a header
should be included as <j6/types.h> then its source should be
src/libraries/j6/j6/types.h - this caused the most churn as all public
header sources moved one directory up.
- The "includes" property of a module is local only to that module now,
it does not create any implicit public interface
Other changes:
- The bonnibel concept of sources changed: instead of sources having
actions, they themselves are an instance of a (sub)class of Source,
which provides all the necessary information itself.
- Along with the above, rule names were standardized into <type>.<ext>,
eg "compile.cpp" or "parse.cog"
- cog and cogflags variables moved from per-target scope to global scope
in the build files.
- libc gained a more dynamic .module file
The manifest can now supply a list of boot flags, including "test".
Those get turned into the bootproto::args::flags field by the
bootloader. The kernel takes those and uses the test flag to control
enabling syscalls with the new "test" attribute, like the new
test_finish syscall, which lets automated tests call back to the kernel
to shut down the system.
The event object was missing any syscalls. Furthermore, kobject had an
old object_signal implementation (the syscall itself no longer exists),
which was removed. User code should only be able to set signals on
events.
Two minor issues: scheduler::prune wasn't formatted correctly, and
j6/caps.h was not using the ull prefix when shifting 64 bit numbers.
(It's doubtful an object would get more than 32 caps any time soon, but
better to be correct.)
Adding the util::deque container, implemented with the util::linked_list
of arrays of items.
Also, use the deque for a kobject's blocked thread list to maintain
order instead of a vector using remove_swap().
The syscall interface is designed to closely follow the System V amd64
calling convention, so that as much as possible, the call into the
assembly trampoline for the syscall sets up the call correctly. Before
this change, the only exception was using r10 (a caller-saved register
already) to stash the contents of rcx, which gets clobbered by the
syscall instruction. However, this only preserves registers for the
function call, as the stack is switched upon kernel entry, and
additional call frames have been added by the time the syscall gets back
into C++ land.
This change adds a new parameter to the syscall in rbx. Since rbx is
callee-saved, the syscall trampoline pushes it to the stack, and then
puts the address of the stack-passed arguments into rbx. Now that the
syscall implementations are wrapped in the _syscall_verify_* functions,
we can piggy-back on those to also set up the extra arguments from the
user stack.
Now, for any syscall with 7 or more arguments, the verify wrapper takes
the first six arguments normally, then gets a stack pointer (the rbx
value) as its 7th and final argument. It's then the job of the verify
wrapper to get the remaining arguments from that stack pointer and pass
them to the implementation function as normal arguments.
The main point of this change is to allow "global" capabilities defined
on the base object type. The example here is the clone capability on all
objects, which governs the ability to clone a handle.
Related changes in this commit:
- Renamed `kobject` to `object` as far as the syscall interface is
concerned. `kobject` is the cname, but j6_cap_kobject_clone feels
clunky.
- The above change made me realize that the "object <type>" syntax for
specifying object references was also clunky, so now it's "ref <type>"
- Having to add `.object` on everywhere to access objects in
interface.exposes or object.super was cumbersome, so those properties
now return object types directly, instead of ObjectRef.
- syscall_verify.cpp.cog now generates code to check capabilities on
handles if they're specified in the definition, even when not passing
an object to the implementation function.
This change finally adds capabilities to handles. Included changes:
- j6_handle_t is now again 64 bits, with the highest 8 bits being a type
code, and the next highest 24 bits being the capability mask, so that
programs can check type/caps without calling the kernel.
- The definitions grammar now includes a `capabilities [ ]` section on
objects, to list what capabilities are relevant.
- j6/caps.h is auto-generated from object capability lists
- init_libj6 again sets __handle_self and __handle_sys, this is a bit
of a hack.
- A new syscall, j6_handle_list, will return the list of existing
handles owned by the calling process.
- syscall_verify.cpp.cog now actually checks that the needed
capabilities exist on handles before allowing the call.
Added methods for releasing the lock held in a scoped_lock early, as
well as reacquiring it after. Useful when, eg a thread is about to block
and should not be holding the lock while blocked.
If a bip_buffer's A buffer is in the middle of being appended to, but
that append has not yet been committed, and all committed A data has
been read, the buffer would get into a bad state where m_start_r pointed
to the end of the previous A buffer, but that data is no longer
connected to either A or B. So now we make sure to check m_size_r before
considering A "done".
This commit contains a couple large, interdependent changes:
- In preparation for capability checking, the _syscall_verify_*
functions now load most handles passed in, and verify that they exist
and are of the correct type. Lists and out-handles are not converted
to objects.
- Also in preparation for capability checking, the internal
representation of handles has changed. j6_handle_t is now 32 bits, and
a new j6_cap_t (also 32 bits) is added. Handles of a process are now a
util::map<j6_handle_t, handle> where handle is a new struct containing
the id, capabilities, and object pointer.
- The kernel object definition DSL gained a few changes to support auto
generating the handle -> object conversion in the _syscall_verify_*
functions, mostly knowing the object type, and an optional "cname"
attribute on objects where their names differ from C++ code.
(Specifically vma/vm_area)
- Kernel object code and other code under kernel/objects is now in a new
obj:: namespace, because fuck you <cstdlib> for putting "system" in
the global namespace. Why even have that header then?
- Kernel object types constructed with the construct_handle helper now
have a creation_caps static member to declare what capabilities a
newly created object's handle should have.
The logger had a lot of code that was due to it being in kutil instead
of the kernel. Simplifying it a bit here in order to make the uart
logger easier and eventual paring down of the logger easier.
- Log areas are no longer hashes of their names, just an enum
- Log level settings are no longer saved in 4 bits, just a byte
- System signal updating is done in the logger now
A structure, system_config, which is dynamically defined by the
definitions/sysconf.yaml config, is now mapped into every user address
space. The kernel fills this with information about itself and the
running machine.
User programs access this through the new j6_sysconf fake syscall in
libj6.
See: Github bug #242
See: [frobozz blog post](https://jsix.dev/posts/frobozz/)
Tags:
This means the kernel now depends on libj6. I've added the macro
definition __j6kernel when building for the kernel target, so I can
remove parts with #ifdefs.
Kernel panics previously only stopped the calling core. This commit
re-implements the panic system to allow us to stop all cores on a panic.
Changes include:
- panic now sends an NMI to all cores. This means we can't control the
contents of their registers, so panic information has been moved to a
global struct, and the panicking cpu sets the pointer to that data in
its cpu_data.
- the panic_handler is now set up with mutexes to print appropriately
and only initialize objects once.
- copying _current_gsbase into the panic handler, and #including the
cpprt.cpp file (so that we can define NDEBUG and not have it try to
link the assert code back in)
- making the symbol data pointer in kargs an actual pointer again, not
an address - and carrying that through to the panic handler
- the number of cpus is now saved globally in the kernel as g_num_cpus
While bonnibel already had the concept of a manifest, which controls
what goes into the built disk image, the bootloader still had filenames
hard-coded. Now bonnibel creates a 'jsix_boot.dat' file that tells the
bootloader what it should load.
Changes include:
- Modules have two new fields: location and description. location is
their intended directory on the EFI boot volume. description is
self-explanatory, and is used in log messages.
- New class, boot::bootconfig, implements reading of jsix_boot.dat
- New header, bootproto/bootconfig.h, specifies flags used in the
manifest and jsix_boot.dat
- New python module, bonnibel/manifest.py, encapsulates reading of the
manifest and writing jsix_boot.dat
- Syntax of the manifest changed slightly, including adding flags
- Boot and Kernel target ccflags unified a bit (this was partly due to
trying to get enum_bitfields to work in boot)
- util::counted gained operator+= and new free function util::read<T>
I just can't get enum_bitfields to work in boot. The same code works in
other targets. None of the compiler options should change that. I gave
up, but I'm leaving these changes in because they do actually handle
const better.
This is a rather large commit that is widely focused on cleaning things
out of the 'junk drawer' that is src/include. Most notably, several
things that were put in there because they needed somewhere where both
the kernel, boot, and init could read them have been moved to a new lib,
'bootproto'.
- Moved kernel_args.h and init_args.h to bootproto as kernel.h and
init.h, respectively.
- Moved counted.h and pointer_manipulation.h into util, renaming the
latter to util/pointers.h.
- Created a new src/include/arch for very arch-dependent definitions,
and moved some kernel_memory.h constants like frame size, page table
entry count, etc to arch/amd64/memory.h. Also created arch/memory.h
which detects platform and includes the former.
- Got rid of kernel_memory.h entirely in favor of a new, cog-based
approach. The new definitions/memory_layout.csv lists memory regions
in descending order from the top of memory, their sizes, and whether
they are shared outside the kernel (ie, boot needs to know them). The
new header bootproto/memory.h exposes the addresses of the shared
regions, while the kernel's memory.h gains the start and size of all
the regions. Also renamed the badly-named page-offset area the linear
area.
- The python build scripts got a few new features: the ability to parse
the csv mentioned above in a new memory.py module; the ability to add
dependencies to existing source files (The list of files that I had to
pull out of the main list just to add them with the dependency on
memory.h was getting too large. So I put them back into the sources
list, and added the dependency post-hoc.); and the ability to
reference 'source_root', 'build_root', and 'module_root' variables in
.module files.
- Some utility functions that were in the kernel's memory.h got moved to
util/pointers.h and util/misc.h, and misc.h's byteswap was renamed
byteswap32 to be more specific.
Now that kutil has no kernel-specific code in it anymore, it can
actually be linked to by anything, so I'm renaming it 'util'.
Also, I've tried to unify the way that the system libraries from
src/libraries are #included using <> instead of "".
Other small change: util::bip_buffer got a spinlock to guard against
state corruption.
Continuing moving things out of kutil. The assert as implemented could
only ever work in the kernel, so remaining kutil uses of kassert have
been moved to including standard C assert instead.
Along the way, kassert was broken out into panic::panic and kassert,
and the panic.serial namespace was renamed panicking.
The moving of kernel-only code out of kutil continues. (See 042f061)
This commit moves the following:
- The heap allocator code
- memory.cpp/h which means:
- letting string.h be the right header for memset and memcpy, still
including an implementation of it for the kernel though, since
we're not linking libc to the kernel
- Changing calls to kalloc/kfree to new/delete in kutil containers
that aren't going to be merged into the kernel
- Fixing a problem with stdalign.h from libc, which was causing issues
for type_traits.
Part two of rearranging kutil code. (See 042f061) Removing unused kutil
headers:
I can imagine that avl_tree or slab_allocated may want to be returned to
at some point, but for now they're just clutter.
Part one of a series of code moves. The kutil library is not very
useful, as most of its code is kernel-specific. This was originally for
testing purposes, but that can be achieved in other ways with the
current build system. I find this mostly creates a strange division in
the kernel code.
Instead, I'm going to move everything kernel-specific to actually be in
the kernel, and replace kutil with just 'util' for generic utility code
I want to share.
This commit:
- Moves the logger into the kernel.
- Updates the 'printf' library used from mpaland/printf to
eyalroz/printf and moved it into the kernel, as it's only used by the
logger in kutil.
- Removes some other unused kutil headers from some files, to help
future code rearrangement.
Note that the (now redundant-seeming) log.cpp/h in kernel is currently
still there - these files are more about log output than the logging
system, and will get replaced once I add user-space log output.
Updated kassert to be an actual function, and used the __builtin_*
functions for location data. Updated the panic handler protocol to
include sending location data as three more parameters. Updated the
serial panic handler to display that data along with the (optional)
message.
Add a simple ELF loader to srv.init to load and start any module_program
parameters passed from the bootloader. Also creates stacks for newly
created threads.
Also update thread creation in testapp to create stacks.
