Load drv.uart.elf and srv.logger.elf from the initrd and start them.
It's extremely manual and hard-coded at the moment, but it works and
they run, getting us back to where we were pre-initrd branch.
The initrd image is now created by the build system, loaded by the
bootloader, and passed to srv.init, which loads it (but doesn't do
anything with it yet, so this is actually a functional regression).
This simplifies a lot of the modules code between boot and init as well:
Gone are the many subclasses of module and all the data being inline
with the module structs, except for any loaded files. Now the only
modules loaded and passed will be the initrd, and any devices only the
bootloader has knowledge of, like the UEFI framebuffer.
The init process now serves as a service locator for its children,
passing all children a mailbox handle on which it is serving the service
locator protocol.
In preparation for the new mailbox IPC model, blocking threads needed an
overhaul. The `wait_on_*` and `wake_on_*` methods are gone, and the
`block()` and `wake()` calls on threads now pass a value between the
waker and the blocked thread.
As part of this change, the concept of signals on the base kobject class
was removed, along with the queue of blocked threads waiting on any
given object. Signals are now exclusively the domain of the event object
type, and the new wait_queue utility class helps manage waiting threads
when an object does actually need this functionality. In some cases (eg,
logger) an event object is used instead of the lower-level wait_queue.
Since this change has a lot of ramifications, this large commit includes
the following additional changes:
- The j6_object_wait, j6_object_wait_many, and j6_thread_pause syscalls
have been removed.
- The j6_event_clear syscall has been removed - events are "cleared" by
reading them now. A new j6_event_wait syscall has been added to read
events.
- The generic close() method on kobject has been removed.
- The on_no_handles() method on kobject now deletes the object by
default, and needs to be overridden by classes that should not be.
- The j6_system_bind_irq syscall now takes an event handle, as well as a
signal that the IRQ should set on the event. IRQs will cause a waiting
thread to be woken with the appropriate bit set.
- Threads waking due to timeout is simplified to just having a
wake_timeout() accessor that returns a timestamp.
- The new wait_queue uses util::deque, which caused the disovery of two
bugs in the deque implementation: empty deques could still have a
single array allocated and thus return true for empty(), and new
arrays getting allocated were not being zeroed first.
- Exposed a new erase() method on util::map that takes a node pointer
instead of a key, skipping lookup.
Added the handle_clone syscall which allows for cloning a handle with
a subset of the original handle's capabilities.
Related changes:
- srv.init now calls handle_clone on its system handle, and load_program
was changed to allow this second system handle to be passed to loaded
programs instead. However, as drv.uart is still a driver AND a log
reader, this new handle is not actually passed yet.
- The definition parser was using a set for the cap list, which meant
the order (and thus values) of caps was not static.
- Some code in objects/handle.h was made more explicit about what bits
meant what.
This change finally adds capabilities to handles. Included changes:
- j6_handle_t is now again 64 bits, with the highest 8 bits being a type
code, and the next highest 24 bits being the capability mask, so that
programs can check type/caps without calling the kernel.
- The definitions grammar now includes a `capabilities [ ]` section on
objects, to list what capabilities are relevant.
- j6/caps.h is auto-generated from object capability lists
- init_libj6 again sets __handle_self and __handle_sys, this is a bit
of a hack.
- A new syscall, j6_handle_list, will return the list of existing
handles owned by the calling process.
- syscall_verify.cpp.cog now actually checks that the needed
capabilities exist on handles before allowing the call.
This is a rather large commit that is widely focused on cleaning things
out of the 'junk drawer' that is src/include. Most notably, several
things that were put in there because they needed somewhere where both
the kernel, boot, and init could read them have been moved to a new lib,
'bootproto'.
- Moved kernel_args.h and init_args.h to bootproto as kernel.h and
init.h, respectively.
- Moved counted.h and pointer_manipulation.h into util, renaming the
latter to util/pointers.h.
- Created a new src/include/arch for very arch-dependent definitions,
and moved some kernel_memory.h constants like frame size, page table
entry count, etc to arch/amd64/memory.h. Also created arch/memory.h
which detects platform and includes the former.
- Got rid of kernel_memory.h entirely in favor of a new, cog-based
approach. The new definitions/memory_layout.csv lists memory regions
in descending order from the top of memory, their sizes, and whether
they are shared outside the kernel (ie, boot needs to know them). The
new header bootproto/memory.h exposes the addresses of the shared
regions, while the kernel's memory.h gains the start and size of all
the regions. Also renamed the badly-named page-offset area the linear
area.
- The python build scripts got a few new features: the ability to parse
the csv mentioned above in a new memory.py module; the ability to add
dependencies to existing source files (The list of files that I had to
pull out of the main list just to add them with the dependency on
memory.h was getting too large. So I put them back into the sources
list, and added the dependency post-hoc.); and the ability to
reference 'source_root', 'build_root', and 'module_root' variables in
.module files.
- Some utility functions that were in the kernel's memory.h got moved to
util/pointers.h and util/misc.h, and misc.h's byteswap was renamed
byteswap32 to be more specific.
Now that kutil has no kernel-specific code in it anymore, it can
actually be linked to by anything, so I'm renaming it 'util'.
Also, I've tried to unify the way that the system libraries from
src/libraries are #included using <> instead of "".
Other small change: util::bip_buffer got a spinlock to guard against
state corruption.
Add a simple ELF loader to srv.init to load and start any module_program
parameters passed from the bootloader. Also creates stacks for newly
created threads.
Also update thread creation in testapp to create stacks.
This change adds a new interface DSL for specifying objects (with
methods) and interfaces (that expose objects, and optionally have their
own methods).
Significant changes:
- Add the new scripts/definitions Python module to parse the DSL
- Add the new definitions directory containing DSL definition files
- Use cog to generate syscall-related code in kernel and libj6
- Unify ordering of pointer + length pairs in interfaces
I'm a tabs guy. I like tabs, it's an elegant way to represent
indentation instead of brute-forcing it. But I have to admit that the
world seems to be going towards spaces, and tooling tends not to play
nice with tabs. So here we go, changing the whole repo to spaces since
I'm getting tired of all the inconsistent formatting.
Create a new usermode program, srv.init, and have it read the initial
module_page args sent to it by the bootloader. Doesn't yet do anything
useful but sets up the way for loading the rest of the programs from
srv.init.
Other (mostly) related changes:
- bootloader: The allocator now has a function for allocating init
modules out of a modules_page slab. Also changed how the allocator is
initialized and passes the allocation register and modules_page list
to efi_main().
- bootloader: Expose the simple wstrlen() to the rest of the program
- bootloader: Move check_cpu_supported() to hardware.cpp
- bootloader: Moved program_desc to loader.h and made the loader
functions take it as an argument instead of paths.
- kernel: Rename the system_map_mmio syscall to system_map_phys, and
stop having it default those VMAs to having the vm_flags::mmio flag.
Added a new flag mask, vm_flags::driver_mask, so that drivers can be
allowed to ask for the MMIO flag.
- kernel: Rename load_simple_process() to load_init_server() and got rid
of all the stack setup routines in memory_bootstrap.cpp and task.s
- Fixed formatting in config/debug.toml, undefined __linux and other
linux-specific defines, and got rid of _LIBCPP_HAS_THREAD_API_EXTERNAL
because that's just not true.
