A bip-buffer is good for producer/consumer systems, but ideally logs
will stay in the buffer until they're ousted because they need to be
overwritten. Now they're a regular ring buffer and every entry has an
incremental id. Consumers pass in the last id they've seen, and will get
the next log in the sequence.
In prep for the coming change to keep log entries as a true ring buffer,
move the log buffer from bss into its own memory section.
Related changes in this commit:
- New vm_area_ring, which maps a set of pages twice to allow easy linear
reading of data from a ring buffer when it wraps around the end.
- logger_init() went away, and the logger ctor is called from
mem::initialize()
- Instead of an event object, the logger just has a bare wait_queue
- util::counted::from template type changed slightly to allow easy
conversion from an intptr_t as well as a pointer
- Previously added debugcon_logger code removed - this will be added in
a separate file in a followup commit
The syscall helpers.h get_handle functions should be returing
j6_err_invalid_arg if the handle they're given is j6_handle_invalid,
unless explicitly set to optional.
The status code from thread exit had too many issues, (eg, how does it
relate to process exit code? what happens when different threads exit
with different exit codes?) and not enough value, so I'm getting rid of
it.
A number of simplifications of mailboxes now that the interface is much
simpler, and synchronous.
* call and respond can now only transfer one handle at a time
* mailbox objects got rid of the message queue, and just have
wait_queues of blocked threads, and a reply_to map.
* threads now have a message_data struct on them for use by mailboxes
Instead of handles / capabilities having numeric ids that are only valid
for the owning process, they are now global in a system capabilities
table. This will allow for specifying capabilities in IPC that doesn't
need to be kernel-controlled.
Processes will still need to be granted access to given capabilities,
but that can become a simpler system call than the current method of
sending them through mailbox messages (and worse, having to translate
every one into a new capability like was the case before). In order to
track which handles a process has access to, a new node_set based on
node_map allows for an efficient storage and lookup of handles.
Created a new util/node_map.h that implements a map that grows in-place.
Now this is used for tracking blocks' size orders, instead of a header
at the start of the memory block. This allows the whole buddy block to
be allocated, allowing for page-aligned (or greater) blocks to be
requested from the heap.
This commit contains a number of related mailbox issues:
- Add extra parameters to mailbox_respond_receive to allow both the
number of bytes/handles passed in, and the size of the byte/handle
buffers to be passed in.
- Don't delete mailbox messages on receipt if the caller is waiting on
reply
- Correctly pass status messages along with a mailbox::replyer object
- Actually wake the calling thread in the mailbox::replyer dtor
- Make sure to release locks _before_ calling thread::wake() on blocked
threads, as that may cause them to be scheduled ahead of the current
thread.
This commit adds a new flag, j6_channel_block, and a new flags param to
the channel_receive syscall. When the block flag is specified, the
caller will block waiting for data on the channel if the channel is
empty.
It seems more common to want to sleep for a duration than to sleep to a
specific time. Change the implementation to not make the process look up
the current time first. (Plus, there's no current syscall to do so)
Three issues that caused build breaks when regenerating the build
directory after the previous commits:
- system.def was including endpoint.def
- syscalls/vm_area.cpp was including j6/signals.h
- util/util.h was missing an include of stddef.h
The new mailbox kernel object API offers asynchronous message-based IPC
for sending data and handles between threads, as opposed to endpoint's
synchronous model.
In preparation for the new mailbox IPC model, blocking threads needed an
overhaul. The `wait_on_*` and `wake_on_*` methods are gone, and the
`block()` and `wake()` calls on threads now pass a value between the
waker and the blocked thread.
As part of this change, the concept of signals on the base kobject class
was removed, along with the queue of blocked threads waiting on any
given object. Signals are now exclusively the domain of the event object
type, and the new wait_queue utility class helps manage waiting threads
when an object does actually need this functionality. In some cases (eg,
logger) an event object is used instead of the lower-level wait_queue.
Since this change has a lot of ramifications, this large commit includes
the following additional changes:
- The j6_object_wait, j6_object_wait_many, and j6_thread_pause syscalls
have been removed.
- The j6_event_clear syscall has been removed - events are "cleared" by
reading them now. A new j6_event_wait syscall has been added to read
events.
- The generic close() method on kobject has been removed.
- The on_no_handles() method on kobject now deletes the object by
default, and needs to be overridden by classes that should not be.
- The j6_system_bind_irq syscall now takes an event handle, as well as a
signal that the IRQ should set on the event. IRQs will cause a waiting
thread to be woken with the appropriate bit set.
- Threads waking due to timeout is simplified to just having a
wake_timeout() accessor that returns a timestamp.
- The new wait_queue uses util::deque, which caused the disovery of two
bugs in the deque implementation: empty deques could still have a
single array allocated and thus return true for empty(), and new
arrays getting allocated were not being zeroed first.
- Exposed a new erase() method on util::map that takes a node pointer
instead of a key, skipping lookup.
The new "noreturn" option tag on syscall methods causes those methods to
be generated with [[noreturn]] / _Noreturn to avoid clang complaining
that other functions marked noreturn, like exit(), because it can't tell
that the syscall never returns.
The manifest can now supply a list of boot flags, including "test".
Those get turned into the bootproto::args::flags field by the
bootloader. The kernel takes those and uses the test flag to control
enabling syscalls with the new "test" attribute, like the new
test_finish syscall, which lets automated tests call back to the kernel
to shut down the system.
The event object was missing any syscalls. Furthermore, kobject had an
old object_signal implementation (the syscall itself no longer exists),
which was removed. User code should only be able to set signals on
events.
The return of slab_allocated! Now after the kutil/util/kernel giant
cleanup, this belongs squarely in the kernel, and works much better
there. Slabs are allocated via a bump pointer into a new kernel VMA,
instead of using kalloc() or allocating pages directly.
The new zero_ok flag is similar to optional for reference parameters,
but only in cases where there is a length parameter. If that parameter
is a reference parameter itself and is null, or it is non-null and
contains a non-zero length, or there is no length parameter, then the
main parameter may not be null.
The main point of this change is to allow "global" capabilities defined
on the base object type. The example here is the clone capability on all
objects, which governs the ability to clone a handle.
Related changes in this commit:
- Renamed `kobject` to `object` as far as the syscall interface is
concerned. `kobject` is the cname, but j6_cap_kobject_clone feels
clunky.
- The above change made me realize that the "object <type>" syntax for
specifying object references was also clunky, so now it's "ref <type>"
- Having to add `.object` on everywhere to access objects in
interface.exposes or object.super was cumbersome, so those properties
now return object types directly, instead of ObjectRef.
- syscall_verify.cpp.cog now generates code to check capabilities on
handles if they're specified in the definition, even when not passing
an object to the implementation function.
Added the handle_clone syscall which allows for cloning a handle with
a subset of the original handle's capabilities.
Related changes:
- srv.init now calls handle_clone on its system handle, and load_program
was changed to allow this second system handle to be passed to loaded
programs instead. However, as drv.uart is still a driver AND a log
reader, this new handle is not actually passed yet.
- The definition parser was using a set for the cap list, which meant
the order (and thus values) of caps was not static.
- Some code in objects/handle.h was made more explicit about what bits
meant what.
This change finally adds capabilities to handles. Included changes:
- j6_handle_t is now again 64 bits, with the highest 8 bits being a type
code, and the next highest 24 bits being the capability mask, so that
programs can check type/caps without calling the kernel.
- The definitions grammar now includes a `capabilities [ ]` section on
objects, to list what capabilities are relevant.
- j6/caps.h is auto-generated from object capability lists
- init_libj6 again sets __handle_self and __handle_sys, this is a bit
of a hack.
- A new syscall, j6_handle_list, will return the list of existing
handles owned by the calling process.
- syscall_verify.cpp.cog now actually checks that the needed
capabilities exist on handles before allowing the call.
Channels were unused, and while they were listed in syscalls.def, they
had no syscalls listed in their interface. This change adds them back,
and updates them to the curren syscall style.
This commit contains a couple large, interdependent changes:
- In preparation for capability checking, the _syscall_verify_*
functions now load most handles passed in, and verify that they exist
and are of the correct type. Lists and out-handles are not converted
to objects.
- Also in preparation for capability checking, the internal
representation of handles has changed. j6_handle_t is now 32 bits, and
a new j6_cap_t (also 32 bits) is added. Handles of a process are now a
util::map<j6_handle_t, handle> where handle is a new struct containing
the id, capabilities, and object pointer.
- The kernel object definition DSL gained a few changes to support auto
generating the handle -> object conversion in the _syscall_verify_*
functions, mostly knowing the object type, and an optional "cname"
attribute on objects where their names differ from C++ code.
(Specifically vma/vm_area)
- Kernel object code and other code under kernel/objects is now in a new
obj:: namespace, because fuck you <cstdlib> for putting "system" in
the global namespace. Why even have that header then?
- Kernel object types constructed with the construct_handle helper now
have a creation_caps static member to declare what capabilities a
newly created object's handle should have.
Since we have a DSL for specifying syscalls, we can create a verificaton
method for each syscall that can cover most argument (and eventually
capability) verification instead of doing it piecemeal in each syscall
implementation, which can be more error-prone.
Now a new _syscall_verify_* function exists for every syscall, which
calls the real implementation. The syscall table for the syscall handler
now maps to these verify functions.
Other changes:
- Updated the definition grammar to allow options to have a "key:value"
style, to eventually support capabilities.
- Added an "optional" option for parameters that says a syscall will
accept a null value.
- Some bonnibel fixes, as definition file changes weren't always
properly causing updates in the build dep graph.
- The syscall implementation function signatures are no longer exposed
in syscall.h. Also, the unused syscall enum has been removed.
This syscall allows a process to give another process access to an
object it has a handle to. The value of the handle as seen in the
receiver process is returned to the caller, so that the caller may
notify the recipient which handle was given.
A structure, system_config, which is dynamically defined by the
definitions/sysconf.yaml config, is now mapped into every user address
space. The kernel fills this with information about itself and the
running machine.
User programs access this through the new j6_sysconf fake syscall in
libj6.
See: Github bug #242
See: [frobozz blog post](https://jsix.dev/posts/frobozz/)
Tags:
This is a rather large commit that is widely focused on cleaning things
out of the 'junk drawer' that is src/include. Most notably, several
things that were put in there because they needed somewhere where both
the kernel, boot, and init could read them have been moved to a new lib,
'bootproto'.
- Moved kernel_args.h and init_args.h to bootproto as kernel.h and
init.h, respectively.
- Moved counted.h and pointer_manipulation.h into util, renaming the
latter to util/pointers.h.
- Created a new src/include/arch for very arch-dependent definitions,
and moved some kernel_memory.h constants like frame size, page table
entry count, etc to arch/amd64/memory.h. Also created arch/memory.h
which detects platform and includes the former.
- Got rid of kernel_memory.h entirely in favor of a new, cog-based
approach. The new definitions/memory_layout.csv lists memory regions
in descending order from the top of memory, their sizes, and whether
they are shared outside the kernel (ie, boot needs to know them). The
new header bootproto/memory.h exposes the addresses of the shared
regions, while the kernel's memory.h gains the start and size of all
the regions. Also renamed the badly-named page-offset area the linear
area.
- The python build scripts got a few new features: the ability to parse
the csv mentioned above in a new memory.py module; the ability to add
dependencies to existing source files (The list of files that I had to
pull out of the main list just to add them with the dependency on
memory.h was getting too large. So I put them back into the sources
list, and added the dependency post-hoc.); and the ability to
reference 'source_root', 'build_root', and 'module_root' variables in
.module files.
- Some utility functions that were in the kernel's memory.h got moved to
util/pointers.h and util/misc.h, and misc.h's byteswap was renamed
byteswap32 to be more specific.
Stop creating stacks in user space for user threads, that should be done
by the thread's creator. This change adds process and stack_top
arguments to the thread_create syscall, so that threads can be created
in other processes, and given a stack address.
Also included is a fix in add_thunk_user due to the r11/flags change.
THIS COMMIT BREAKS USERSPACE. See subsequent commits for the user side
changes related to this change.
This change adds a new interface DSL for specifying objects (with
methods) and interfaces (that expose objects, and optionally have their
own methods).
Significant changes:
- Add the new scripts/definitions Python module to parse the DSL
- Add the new definitions directory containing DSL definition files
- Use cog to generate syscall-related code in kernel and libj6
- Unify ordering of pointer + length pairs in interfaces
